D24T.com  

Go Back   D24T.com > Technical Discussion Area > Performance and aftermarket
Register FAQ Community Calendar Today's Posts Search

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 10-21-2019, 02:38 AM
DrSpanky DrSpanky is offline
Junior Member
 
Join Date: Jul 2015
Posts: 15
Default

Quote:
Originally Posted by matchless View Post
So you know the parts number of the cam plate? I have found one but I'm not sure if it is the right one
Bosch 1466111626 Cam Plate
the locating pin for the plunger on this is bigger than the original by 0.5mm if i recall so you have to press it out a grind it down a little. I will post measurements when i get home.

Dan

Edit
The pin in 9.13mm long
The standard pump pin width is 3.5mm
The upgraded pump is 4.00mm wide

The pin protrudes 4mm from the cam plate with the rest being interference fit into the camplate.
__________________
Silver Volvo 740 Tic m46 estate - Daily Driver
Green Volvo 940 TIC m90 estate - Drift Project
Purple Volvo 940 2.3 Auto LPT - Spares
Based in the UK

Super Turbo Diesel project
https://drive.google.com/drive/folde...GA?usp=sharing

Last edited by DrSpanky; 10-21-2019 at 08:30 AM.
Reply With Quote
 

Tags
compound, pump, tune, turbo


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 04:31 AM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.