|
|
#1
07-15-2014, 03:44 PM
|
|||
|
|||
D24 Special Tools
Here are some photos and brief descriptions of D24 Special Tools.
For working on IP, IP belt, IP timing, Cogged cam pulley, Injector lines: Collection 2.jpg From top to bottom: Dogleg 17mm offset wrench w/ 1/2" socket for torque wrench. Easier wrenching of rear cam pulley and IP pulley nuts. Volvo tool P/N reads 9995201 Offset 17mm.jpg Cam pulley holder. Holds cam pulley stationary while tightening/loosening nut. Also rotates pulley on camshaft to adjust IP timing. Cogged Cam Pulley Holder.jpg Closeup of P/N 9995199 21 AF-1134 Cogged Cam Pulley Holder close.jpg Injector line wrench. Should be able to reach all of them with this wrench! Hazet tool P/N 4560 Injector line wrench.jpg
__________________
1985 744 gle d24t 1985 745 gle d24t Last edited by ngoma; 07-15-2014 at 04:02 PM. 
|
|
#2
07-15-2014, 04:04 PM
|
|||
|
|||
|
IP Pulley remover. P/N 9995204 21
Cogged Pulley Remover.jpg IP Pulley lock pin IP Pulley Lock Pin.jpg
__________________
1985 744 gle d24t 1985 745 gle d24t
|
|
#3
02-03-2015, 10:24 AM
|
|||
|
|||
|
Not specifically a Volvo special tool, but very useful, when necessary. For removing the IP shaft seal (and possibly other similar seals).
Lisle Shaft Type Seal Puller 58430 
__________________
1985 744 gle d24t 1985 745 gle d24t
|
|
#4
02-04-2015, 11:12 AM
|
|||
|
|||
|
Are any special tools used for the 1.6 liter VW engines the same as those used for the D24? I found this kit http://www.partsplaceinc.com/product...aspx?sku=17821
|
|
#5
02-04-2015, 10:20 PM
|
|||
|
|||
|
Timing tools are the same.
Hazet 2574-1 back scratcher & tappet depressor. My only one where the self made version truly sucked. Droid autocorrect really really thought I wanted to call it 'hazel'
|
|
#6
02-18-2015, 09:18 AM
|
|||
|
|||
|
Anybody have the part number or link to the crankshaft holder, or what tools specifically interchange between the VW 1.6 and the D24?
|
|
#7
02-18-2015, 07:53 PM
|
|||
|
|||
|
Tools
This blog listed a few of the d24 tools, including Volvo part numbers.
http://www.upshiftblog.net/2012/02/i...ming-belt.html Scroll down to see there is the `Greenbook` ready to download, in 3 parts (if needed). (`Service Manual Repairs and maintenance, D20, D24`) Lots of `tool-talk` here too: http://volvoturbodiesel.blogspot.com/ with pics & part #s. Last edited by RedArrow; 02-18-2015 at 08:11 PM.
|
|
#8
02-19-2015, 08:28 AM
|
|||
|
|||
|
Thanks for the links. I found the first one very useful in cross referencing part numbers and was able to find some of the tools through tasca.
|
|
#9
02-21-2015, 02:41 PM
|
|||
|
|||
|
I can get the tools for the same or possibly cheaper than Tasca...
__________________
Mike Rausch Newark/Bear, DE Selling NEW and USED Volvo parts! www.swedishbrickyard.com Email: mike@swedishbrickyard.com
|
 |
|
|
Linear Mode
