D24T.com  

Go Back   D24T.com > Technical Discussion Area > Diesel Engine and Drivetrain
Register FAQ Community Calendar Today's Posts Search

Reply
 
Thread Tools Display Modes
  #1  
Old 05-30-2010, 10:26 PM
volvo d6 volvo d6 is offline
Senior Member
 
Join Date: Aug 2009
Posts: 113
Default Oil in the water....

I have oil in the water on a d24. Is the head cracked or can i be lucky it just be the gasket? Someone who has experienced this before? The pressure in the water is just fine and it cools wery well.
Reply With Quote
  #2  
Old 05-31-2010, 02:21 AM
v8volvo v8volvo is offline
Supporting Member
 
Join Date: Jun 2009
Location: Montana, USA
Vehicle: '86 745, '83 764
Posts: 1,622
Default

Probably just the gasket. They fail frequently on these. Replace and all will be well. Have the head pressure checked if you can just to be sure but they aren't known for cracking on these unless you severely overheat it and it sounds like you didn't do that. It will have small cracks between the valve seats on all the cylinders, usually, but that is not a cause for concern -- they all do it and it doesn't affect anything as long as the crack is not *into* the valve seat.
__________________
86 745 D24T/ZF 345k lifted 2.5"
83 764 D24T/M46 155k
Reply With Quote
  #3  
Old 05-31-2010, 02:31 AM
volvo d6 volvo d6 is offline
Senior Member
 
Join Date: Aug 2009
Posts: 113
Default

The engine runs and start very well to have broken cold start and 1 broken plug. I know the d24 very well but have never had oil in the water. I am very happay for a nice and good answer
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 03:02 PM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.