#1
|
|||
|
|||
Idler Pulley
I can't seem to find any listing for the idler pulley for the t-belt. Mine has a little bit of crunchiness in it. Ebay shows one for the 940 d24t, but I believe those have a somewhat different routing with tensioner etc. Haven't had any luck finding one, its 74mm diameter. Even tried raiding local parts shop, but none have the same inner diameter on the bearing. Anybody know where to find one? Would like to get my belt on so I can move on to valve adjustment.
__________________
1985 744 D24T M46 49mm t3 @20psi 280k |
#2
|
|||
|
|||
d24
I have a question please, i bought three of these from IPD, two got installed on nonturbo d24s but Im not yet sure whether or not the third one can be used on the d24t...
Pictures show part numbers and manufacturer info. They may have what you need. Last edited by RedArrow; 02-05-2017 at 11:12 AM. |
#3
|
|||
|
|||
I bought a idler bearing from Voluparts in Atlanta about a year ago. $40. Make sure to find out what they are going to charge for shipping before you give them your credit card information. They are very proud of their shipping.
|
#4
|
|||
|
|||
Well I talked with Russ today and you can get them on Rockauto. For some reason they were not coming up for 85, but they are there for 86 models.
__________________
1985 744 D24T M46 49mm t3 @20psi 280k |
|
|