#1
|
|||
|
|||
D24 dyno results.
This is a video of my 940 d24tic at the dyno the other week.
Im using this as a benchmark for my VNT d24 project car I couldnt find any other results/figures from doing little modifications as most of us will have done. This is a 'standard' car, no cat, no rear silencer. 19 psi and a fair bit more fuel. Project car will hopefully make 250-260 bhp and close to 380ft/lbs at 26-30psi Figures are 218ft/lbs 151.3 bhp https://youtu.be/2p4lBab0bu0 |
#2
|
|||
|
|||
Ohh yes... i forgot to mention that the clutch was slipping in the video.. so it actually probably makes a little more torque
|
#3
|
|||
|
|||
Did that car originally have a cat?
__________________
1985 744 gle d24t 1985 745 gle d24t |
#4
|
|||
|
|||
probably not, its a 92. but diesel exhausts must have been tricky to get hold of and it must have been fitted with one at some point
|
#5
|
|||
|
|||
What are your plans for headgasket at 30psi? MLS gasket, studs?
__________________
1985 744 gle d24t 1985 745 gle d24t |
#6
|
|||
|
|||
Yeah victor reinz mls and 12.9 headbolts, also running roughly 19:1 C/R |
|
|