|
|
#1
04-07-2012, 04:38 PM
|
|||
|
|||
spring and wheels for the 740
here are pictures of my 740 sitting on B&G lowering spring and xc90 rims with 35mm spacer
[ATTACH=CONFIG]352[/ATTACH] [ATTACH=CONFIG]353[/ATTACH] [ATTACH=CONFIG]354[/ATTACH] [ATTACH=CONFIG]355[/ATTACH] [ATTACH=CONFIG]356[/ATTACH] sorry for the cellphone quality 
|
|
#2
05-04-2012, 03:10 AM
|
|||
|
|||
|
Look good mate. What size are the wheels and tyres?
Which spacers did you use? I'm going to use V70 wheels on mine (fed up of trying to find Polaris, Galaxy, etc) with H&R 25mm spacers.
__________________
1990 Volvo 765 D24Tic (factory UK spec Tic). Monark 273 nozzles 163bar, Ajusa MLS gasket, 16psi, Water Injection, 17" Titans with 25mm H&R spacers, running 85% WVO/SVO. http://i103.photobucket.com/albums/m...AG0269-sig.jpg
|
|
#3
07-13-2014, 01:31 PM
|
|||
|
|||
|
H&R
IPD sells those spacers for like 150, damn, anyone has a set (2) (planned for rear only) that`s not in use&for sale?
I could use some info on BETTER/BEST/MOST SUGGESTED spacer types, sizes, brands, because i saw cheapos for around 50 on ebay but they might be just fine. I really dont want wheels to `come out` at all, prefer vintage look on a brick. I`m on Hydras currently, with no rim diameter upgrade plans for now. I know, info available on internet everywhere, read a lot about spacers but straight experience&info from Volvoers is much more appreciated. Thanks for your time. Last edited by RedArrow; 07-13-2014 at 01:46 PM.
|
 |
|
|
Linear Mode
