D24T.com  

Go Back   D24T.com > Technical Discussion Area > Performance and aftermarket

Reply
 
Thread Tools Display Modes
  #1  
Old 08-13-2021, 04:53 AM
teknobil teknobil is offline
Junior Member
 
Join Date: Apr 2021
Location: Cyprus
Vehicle: 740
Posts: 7
Default intercooler selection

Hello to everyone,

My d24t tool is currently working around 1 bar. I need an intercooler, I don't know how to choose it, what should I pay attention to?
Reply With Quote
  #2  
Old 08-13-2021, 09:26 AM
v8volvo v8volvo is offline
Supporting Member
 
Join Date: Jun 2009
Location: Livingston, MT
Vehicle: '86 745, '83 764
Posts: 1,463
Default

In theory the main things would be:

- CFM flow rate / pressure drop at desired CFM (you can calculate this based on turbo size, boost pressure, and some assumptions about air temperature)
- heat exchange capacity (correlated to size and surface area of the IC)
- fitment in the car of the intercooler core and the plumbing for it

In practice, the #3 concern above (fitment) will be the most important. Any intercooler will help as long as it is of reasonable size, so you want one that won't be too much of a fight to install and plumb pipes to.

Good options are abundant on ebay for aftermarket types, but the factory Volvo intercoolers as used on the gasoline (or later Euro diesel) 700 series turbo cars are also good intercoolers, nice and large, and of course bolt right in with factory plumbing. Personally I would probably try one of those first if one were available.

What year is your 740? There are 2 styles of factory intercooler, 1991-older and 1992-newer. You would want one from the same type as you have now.
__________________
86 745 D24T/ZF 345k lifted 2.5"
83 764 D24T/M46 155k
Reply With Quote
  #3  
Old 08-20-2021, 04:57 AM
teknobil teknobil is offline
Junior Member
 
Join Date: Apr 2021
Location: Cyprus
Vehicle: 740
Posts: 7
Default

Hi,V8Volvo
Thank you for the information.
My car was a 740 89' B 200 petrol but I converted it to a d24t. I rebuilt it and it's very hot in the country I live in (Cyprus) there is no problem for the hoses, I can make them. I also have an N/A intake manifold. I just don't have intercoolers. Where can I get an original intercooler? Or will the 5.30 BMW intercooler work for me? There is a 2019 Model water-cooled Mercedes AMG cooler . Since I don't know how to choose it, I'm wondering what I should pay attention to.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 10:06 AM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2021, vBulletin Solutions, Inc.