|
|
#1
08-08-2023, 12:36 PM
|
|||
|
|||
Cummins cam plate
hi, i'm thinking of buying a cummins cam plate for my d24tic, is it any noticable diffrence along with a 11/12mm pump head? and can i use the cam plate with the number 1466111626? Even tho the cumins pump is rotating the other way?
thx 
|
|
#2
08-09-2023, 08:48 AM
|
|||
|
|||
|
It's all maths RE fuel, looks like 12mm and 2.8mm is best option but I've not found one yet. The pin on a Cummins is bigger so needs tweaking to make it fit (like 0.5mm). I ran a large 3 to 4mm camplate with a 10mm and had a run away event so just went with the 12mm I had available.
Rotation doesn't matter for an idi camplate as it's a symmetrical curve. Di camplates can have an actual profile on them the leading edge. 10mm head, 2mm cam, 15.7mm3 12mm head, 2mm cam, 22.6mm3 12mm head, 2.8mmcam, 31.6mm3 10mm head, 4mm cam, 31.4mm3 12mm head ,4mm cam, 45.2mm3
__________________
Silver Volvo 740 Tic m46 estate - Daily Driver Green Volvo 940 TIC m90 estate - Drift Project Purple Volvo 940 2.3 Auto LPT - Spares Based in the UK Super Turbo Diesel project https://drive.google.com/drive/folde...GA?usp=sharing
|
 |
|
|
Linear Mode
