|
|
#8
03-13-2019, 04:30 AM
|
|||
|
|||
Hello,
I checked the injection pump timing, when it showed 0.97mm lift it was three teeth out on the flywheel gear. I reset the timing by loosening of the cam rear sprocket as advised. She ticks over a little more smoothly and a little less smoke but still no revs increase. I checked it three times to be sure. I intend to put an electric pump in prior to the banjo on the inlet side to see if it is the primary pump is performing badly. Any advice welcome. Regards Michael 
|
|
|
Threaded Mode