So the car is not dead

[John Davies]

If you mean a ball joint separator, the best type is the one meant for small HGV's or vans. The cheap ones from accessory shops are intended for more puny vehicles!

Separating joints with a prybar can cause distortion.

Mine was made by Sykes-pickavant and bought for £12.00 from ebay. New ones are about £70 -120 new dependant on manufacturer..

Regards

John D

[noitulover]

Originally Posted by John Davies

If you mean a ball joint separator, the best type is the one meant for small HGV's or vans. The cheap ones from accessory shops are intended for more puny vehicles!

Separating joints with a prybar can cause distortion.

Mine was made by Sykes-pickavant and bought for £12.00 from ebay. New ones are about £70 -120 new dependant on manufacturer..

Regards

John D

is a HGV like a SUV?

i got it right next to the ball joint so i think it was all gravy. didn't notice any distortions. thanks for the heads up though.

[volvo d6]

HGV=Stationwagon

[noitulover]

yo. thanks, cool