D24T.com  

Go Back   D24T.com > Classifieds > Parts for sale
Register FAQ Community Calendar Today's Posts Search

Reply
 
Thread Tools Display Modes
  #11  
Old 09-30-2017, 06:39 PM
ngoma ngoma is offline
Supporting Member
 
Join Date: Nov 2009
Posts: 1,393
Default

Quote:
Originally Posted by RedArrow View Post
...the gtd nozzles (set at 170) are in and it was a huge difference immediately.
Idk why, probably my injectors were very worn out.
What were the old injectors set to? Big difference in POP setting (old vs. new) could be the source of the performance difference.
__________________
1985 744 gle d24t
1985 745 gle d24t
Reply With Quote
  #12  
Old 10-01-2017, 06:12 AM
RedArrow RedArrow is offline
Senior Member
 
Join Date: Jan 2013
Location: New York
Vehicle: 1986 Volvo 745 TD
Posts: 903
Default

Unfortunately I have no idea what the old injectors were set to because it wasnt me who installed them back then, and I havent touched them for six years. It was a multiple hour struggle to get the injectors out safely. I also do not know what type of nozzles they have.
I am sure they were worn because my smoke is gone. I did not change anything else purposely. I d k how many miles those old injectors had in them before me but I added appr 30k miles.

I did have smoke and it always bothered me. Lately it was pretty disturbing bc i could see massive clouds of grey behind me especially when city driving at night, i could blind the driver behind me anytime. It wasnt black or blue smoke, it was greyish. I always saw it in the headlights of cars behind me. I love how people do not tailgate me though!!! Once a rich guy cursed me for stopping early for a traffic light that was soon turning red out so I punished him bigtime in a huge never disappearing grey cloud and he got stuck getting it for a long time and coughing in his cabriolet not seeing a thing for minutes. Nice lesson for those who dont respect vintage diesels and tailgate plus curse at brickers. ... Other drivers and bystanders loved it too bc he was a really mean ahole that kept blocking the box and obstructing pedestrian crosswalks block by block and kept hating the world and its people while constantly cursing.

I used to have lot of grey smoke not at startup but every time i accelerated from lower rpms (All gears). Even worse when tranny was in higher gear compared to actual speeds such as 3rd at 25mph or 2nd at 10-15mph etc or 35 in 4th etc. It happens in traffic when you gotta slow down a bit then you give it gas again but not yet time to shift down. Then it smoked a Lot......
usually it smoked from 1500 to 3000rpm i think, under acceleration and never at idle or startups.
Last time i checked timing it was at .93 i think. I will recheck but now it runs so perfectly that i dont even wanna know. Or should i set it at .95-98? I have no idea but maybe the fuel can get turned up a bit too. The car feels like it could use it now, it just wants to go but something is holding back a little (no brake drag ) ...
Im just thinking it could go / pull even much faster/stronger.

I'll keep experimenting for a few hundred miles without all adjustments then we'll see.
Since the intake and exhaust manifolds got off to be cleaned, i hear and feel the turbo being more active too, it jumps in earlier i think, i noticed hearing a nice healthy whistle as it spools.
I love driving it even more now.

Last edited by RedArrow; 10-01-2017 at 06:28 AM.
Reply With Quote
  #13  
Old 09-19-2024, 08:45 AM
Venlonaer Venlonaer is offline
Junior Member
 
Join Date: Sep 2024
Location: NL
Vehicle: Volvo 240
Posts: 1
Default

Quote:
Originally Posted by anders View Post
I have 6 more of these 12mm "super pump" heads/rotors available to sell. I have been impressed with quality of these parts from this vendor I have purchased fuel system parts for my cummins from them.

$325 for the 12mm pump head/rotor, IP re-seal kit, and input shaft seal shipped to the lower 48. $375 shipped internationally
Want 2 or 3? Additional $300 each

I have fitted 6 of these to our pumps and have been running one for over a 2 years now. I personally know of 4 people local to me running these, all pumps that I built with these 12mm heads.


I also have DNOSD274 "GTD" nozzles and DNOSD297 nozzles from the same manufacturer.
$75 for set of 6.

I'm also selling ARP head stud kits for the D24T, $335 shipped to the lower 48


I will combine shipping.
I’d like to buy a set M11 studs please
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 12:25 PM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.