#1
|
|||
|
|||
install pump VOLVO PENTA KD42 ref: 0460426218 VE6/12f1950L
Hello everybody! I am new in the forum, my name's Alberto and I live in France. At this moment I'm modifying a D24TIC engine to mount on my boat.
I need your help, because I mounted a 12mm pump VOLVO PENTA, I've done the timing (96mm). The pump has been mounted with injectors "DLLA147P827" (265 BAR). The timing's pump on the VOLVO PENTA engine is 3-4 mm So, I would like to know what type of injectors should I put ? And at which pressure would it open ? ps : I would put some photos when I'll have the time to! (I really enjoy the forum, and I particulary like Jason's work, is doing great work!!!! have a nice day! ) Excuse me for my bad english! A big thank you! |
#2
|
|||
|
|||
thank you for your attention
|
#3
|
|||
|
|||
Maybe a pic of your boat will help us think about it
I haven't seen much reason not to use the regular injectors DNO SD276 VWGTD or stock DNO SD293 ~AKA DNO SD1930 in the states? Timing will probably take some experimentation with your lower rev DI camplate unless you switched that. I'm told by a guy I know to give good advice that 12 degrees before top dead center as measured with a piezo timing light is a good starting point. |
#4
|
|||
|
|||
1399621474246.jpg
1399621514605.jpg 1399621524098.jpg 1399621550093.jpg 1399622155846.jpgthank you very much for your time to share this! I made a purchase on ebay injector bosch dnosd 293 Here are some pictures of my project. Merci |
#5
|
|||
|
|||
|
#6
|
|||
|
|||
|
#7
|
|||
|
|||
D24 boat!
More pictures more videos please! updates needed
|
|
|