|
|
#21
06-06-2019, 03:16 PM
|
|||
|
|||
I was able to move the IP sprocket by taping on it lightly with a hammer and die. The IP sprocket did move when I applied tension to the belt.
|
|
#22
06-06-2019, 11:57 PM
|
|||
|
|||
|
Good. We should still try to see if the IP internals can rotate thru at least a few cycles. Can you walk the belt off? And then try rotate the IP shaft via a wrench on the sprocket pulley nut? I wouldn't use a hammer and punch to try to move it further, seems like too much of a shock.
__________________
1985 744 gle d24t 1985 745 gle d24t
|
 |
| Tags |
| d24t, died, diesel |
|
|
Linear Mode
