#1
|
|||
|
|||
Effects of timing (12mm pump)
I've installed my 12mm pump now, and have timing set to 0.88 at the moment. My old pump was set to 1.05mm (thought I'd set it to 1.00, but obviously not!
I'm going to advance it a bit more, but what should I expect? Should turbo lag reduce or increase with extra advance? How do I know if I've gone too far? It didn't really rattle when warm set at 1.05 with the old pump, but the pump was very worn! Does 12mm pump affect the "perfect timing" value? I'm running 163 bar Monarch GTD nozzles and I believe my engine is probably a bit low on compression generally, but all cylinders within 10-15% of each other. Starts really quickly on all 6 even at 0C with only giving glow plugs 15 seconds, so can't be too worn.
__________________
1990 Volvo 765 D24Tic (factory UK spec Tic). Monark 273 nozzles 163bar, Ajusa MLS gasket, 16psi, Water Injection, 17" Titans with 25mm H&R spacers, running 85% WVO/SVO. http://i103.photobucket.com/albums/m...AG0269-sig.jpg |
#2
|
|||
|
|||
The 12mm pump will effectively have more advanced timing then the 10mm pump. I typically run .10mm less timing with the 12mm pump. So around .9-.95 seems to be good.
Advancing the pump runs cleaner, retarded will spool the turbo faster.
__________________
12mm pump heads, ARP stud kits and GTD nozzles available! http://d24t.com/showthread.php?t=1646 NA intake manifolds and 240 turbo pans for sale. Need d24 or d24t parts? PM me! Shipments done on fridays! 1982 242 D24+T/M46- Super pumped! Build thread: http://www.d24t.com/showthread.php?t=1545 1984 764 D24T/ZF build thread: http://www.d24t.com/showthread.php?t=1734 Diesel parts cars: 82 244,83 244, 84 244, 84 245, 85 745 |
#3
|
|||
|
|||
Ok thanks. I have tried 0.88, 0.93 and now 1.05 (it moved when I tightened it up). 0.93 felt the best in terms of spool and power.
1.05 is too far I think - bit clattery around 2000rpm, and feels a bit weak under boost.
__________________
1990 Volvo 765 D24Tic (factory UK spec Tic). Monark 273 nozzles 163bar, Ajusa MLS gasket, 16psi, Water Injection, 17" Titans with 25mm H&R spacers, running 85% WVO/SVO. http://i103.photobucket.com/albums/m...AG0269-sig.jpg |
|
|