#1
|
|||
|
|||
Dashboard lighting
Good day,
Since a couple of weeks my dashboard lighting started to fail, First it was just the middle of the speedo which stopped lighting, later everything. I've noticed that sometimes the lighting starts to blink a little bit.. but I've had that twice in 4 weeks. I'm not a hero with electric parts Does anyone have a idea what could be the culprit? |
#2
|
|||
|
|||
I had this once and it developed into a bigger problem : the alternator wasnt charging anymore.
My ignition switch also had to get replaced. I had to carefully inspect the cluster and I found a broken connector with wires and solders that were cracked and had to be redone. Somewhere in the lower middle area (center) there is a connector under a plastic cover that was completely broken and chipped with it a part out of the main "motherboard" lol. I found an 87 780 cluster and used that for creating 1 working cluster out of 2clusters for the 86 745 by swapping good bertone parts into my cluster. Check and TEST all wire routings for continuity and check solders as step 1. Good luck to figure this annoying trouble. My issues started showing when i steered left a lot. Like at u-turns when the wires somehow got pulled i think. Later it developed into a real pain daily... |
#3
|
|||
|
|||
Quote:
|
#4
|
|||
|
|||
Quote:
Some of my instrument panel illumination bulbs (the ones that plug into the little plastic bayonet housings)(not the smallest "grain of wheat" bulbs) had intermittent failures. Solution was cleaning and polishing the bayonet copper contacts and the corresponding copper traces on the flexboard that they make contact with.
__________________
1985 744 gle d24t 1985 745 gle d24t |
|
|