|
|
#1
07-15-2014, 04:44 PM
|
|||
|
|||
D24 Special Tools
Here are some photos and brief descriptions of D24 Special Tools.
For working on IP, IP belt, IP timing, Cogged cam pulley, Injector lines: Collection 2.jpg From top to bottom: Dogleg 17mm offset wrench w/ 1/2" socket for torque wrench. Easier wrenching of rear cam pulley and IP pulley nuts. Volvo tool P/N reads 9995201 Offset 17mm.jpg Cam pulley holder. Holds cam pulley stationary while tightening/loosening nut. Also rotates pulley on camshaft to adjust IP timing. Cogged Cam Pulley Holder.jpg Closeup of P/N 9995199 21 AF-1134 Cogged Cam Pulley Holder close.jpg Injector line wrench. Should be able to reach all of them with this wrench! Hazet tool P/N 4560 Injector line wrench.jpg
__________________
1985 744 gle d24t 1985 745 gle d24t Last edited by ngoma; 07-15-2014 at 05:02 PM. 
|
|
|
Threaded Mode