#21
|
|||
|
|||
Crossmember is cracked in 740 d24t, i have a non-cracked same year 1985 xm
Quote:
there`s absolutely no welding necessary when transfering the `right side engine mount angled base` either? (My other option is, as V8volvo suggested in another post, to grab the spare 1985 d24t crossmember (I have it from a parts car) and get it reinforced at all necessary spots first, then install that right after taking the cracked one out. I might prefer doing it this way but if someone can tell me for sure what exact models` crossmembers I could use; then I may try ordering it... or finding a good and proper donor non-d24t model Volvo in a junkyard before winter hits. I am just not totally sure what exact other volvo 700/900 models have the crossmember that works best for the 740 d24t car. ) Thanks for the comfirmation. P.S.: I noticed the cracks on my d24t crossmember about 7yrs ago, both sides. Back then, as NGoma suggested I drilled holes at the ends of those cracks to stop the gaps from `spreading`. It doesnt look severe but we never know, right? I don`t think they worsened a lot but it is time to get this project gone from my checklist. Last edited by RedArrow; 10-27-2020 at 03:53 PM. |
|
|