|
#1
|
|||
|
|||
volvo 244 d24 bw55 1979...
Привет ребята я из России город Санкт Петербург... Недавно купил старую вольво244 оказалось у неё плохая головка блока (вся в трещинах) и ещё один нюанс....болты ее крепления М11 !!! Нигде не найти такую головку :-( :-( :-( может у вас есть головка под болты М11? Ну и сами болты тоже нужны. Вот блин попадос :-( забыл кстати....... Двигатель d24 модель cw
__________________
https://m.vk.com/id197185425 Last edited by andrei.dorik; 09-20-2014 at 07:48 AM. |
#2
|
|||
|
|||
Cracks like this
are normal, and nothing to worry about. But 11mm motors are not a great starting point. |
#3
|
|||
|
|||
Quote:
__________________
https://m.vk.com/id197185425 Last edited by andrei.dorik; 09-20-2014 at 03:33 PM. |
#4
|
|||
|
|||
Hi friends. Something not to many answers. I think in Amerika Russian language do not know very many people. :-( Now try to deal with the phone. it has a translator :-)
__________________
https://m.vk.com/id197185425 Last edited by andrei.dorik; 09-23-2014 at 06:03 AM. |
#5
|
|||
|
|||
Describe my problem.... on my car volvo 244 installed cylinderhead with bolt m11 It is very rare.... Under the bolts m12 heads a lot, but my car dont need them. In my head cracs in 4 5 and 6 cylinders and the coolant enters the engine. and still going gases in the system and oil too :-( :-( I forgot completely......engine model D24 model CW.
__________________
https://m.vk.com/id197185425 |
#6
|
|||
|
|||
may you have the cylinderhead on the engine D24 under m11 bolts? my email is....andrei.dorik@mail.ru
__________________
https://m.vk.com/id197185425 Last edited by andrei.dorik; 09-23-2014 at 06:10 AM. |
|
|