|
#1
|
|||
|
|||
Injectors , vac pumps
Many injectors
Location North Carolina USA Cost 10 each 130 bar both short and long kca30sd27/4. And 2 kca30s44 130bar And I have two turbos one is running in the short ones and one is running the long ones 27/4 and they come with a tested glow plug free if price is bad let me know Also come with the press In Seats Vac pumps 40 each Last edited by Impolvo; 06-04-2019 at 04:04 PM. |
#2
|
|||
|
|||
Cannot tell if it is a fair price yet. Have the injectors been cleaned/refurbished/tested? Are they for D24 or D24T? Same for the vacuum pumps, have they been tested?
__________________
1985 744 gle d24t 1985 745 gle d24t |
#3
|
|||
|
|||
Quote:
He had some test rig which he would not let go of all though he no longer has any diesels Vacuum pumps were all removed from cars That were used at least when they came into his shop and the owners did not want to pay to have whatever needed to be done to the cars And he told me a trick to just flip the diaphragm around which I did with what I knew had failed and miraculously it worked as new Until they’re gone I can include factory clamps from injector to injectorI do not currently know how to differentiate between turbo and nonturbo other than I have a couple reman in the box non turbo The glow plugs I have are all used but he tested the resistance and separated them and I only kept factory ones not the cheap aftermarket like I put in my car before I met this man |
#4
|
|||
|
|||
D24 or D24T?
|
#5
|
|||
|
|||
Some are short some are longer tops
Can make sets of each Looks like a lot of 27/4 na injectors 10 each Last edited by Impolvo; 06-04-2019 at 12:25 PM. |
#6
|
|||
|
|||
I also have a spare injection pump
And new d24 starter |
#7
|
|||
|
|||
I also have a spare injection pump
And new d24 starter |
#8
|
|||
|
|||
I am working on a D24T and am missing the pushrod for the vacuum pump it measures
70.95 mm long and 15.98 mm diameter. If you have one how much with shipping. Keith |
|
|