Quote:
Originally Posted by Maciek4530
- Can i remove it with oil in car? It will drip a lot of oil or just few drips? Of course on normal oil level and cold engine.
|
This is theoretical as I have not done this but: If you have the car raised in the front (on jackstands or ramps) the oil level should be below the hole.
Quote:
Originally Posted by Maciek4530
- If i remove screw (volvo 1328241) plunger (?) and spring will fell out? Can i put them in place without removing oil pump (so basically whole engine)?
Don't want to remve whole engine right now before winter at my driveway.
- There is any chance to put those parts backwards or both can be installed in different orientation?
|
Remove it slowly and keep track of orientations. Take photos. Have a helper who can assist with the visuals.