D24T.com  

Go Back   D24T.com > Technical Discussion Area > Diesel Engine and Drivetrain
Register FAQ Community Calendar Today's Posts Search

Reply
 
Thread Tools Display Modes
  #1  
Old 11-01-2024, 03:39 PM
Maciek4530 Maciek4530 is offline
Junior Member
 
Join Date: Oct 2024
Location: Poland
Vehicle: D24
Posts: 16
Default D24 - Oil pump screw plug leakage

Hi!

It's my 2nd post on this fourm. After 700km after headgasket (and 2 years of sitting of this 240 from 1992) my only leak is from this plug. I think it's only place that i didn't reseal when i work on that engine (seals, orings, gaskets etc.)

I find that screw on catalogue scheme and greenbook but still i have questions:

- Can i remove it with oil in car? It will drip a lot of oil or just few drips? Of course on normal oil level and cold engine.

- If i remove screw (volvo 1328241) plunger (?) and spring will fell out? Can i put them in place without removing oil pump (so basically whole engine)?
Don't want to remve whole engine right now before winter at my driveway.

- There is any chance to put those parts backwards or both can be installed in different orientation?

4b32f067-6b5e-4a2b-8b10-c8d4575f9540.jpg
1.jpg
2.jpg
Reply With Quote
  #2  
Old 11-04-2024, 01:16 PM
Maciek4530 Maciek4530 is offline
Junior Member
 
Join Date: Oct 2024
Location: Poland
Vehicle: D24
Posts: 16
Default

Anyone?
Reply With Quote
  #3  
Old 11-05-2024, 12:03 PM
ngoma ngoma is offline
Supporting Member
 
Join Date: Nov 2009
Posts: 1,393
Default

Quote:
Originally Posted by Maciek4530 View Post
- Can i remove it with oil in car? It will drip a lot of oil or just few drips? Of course on normal oil level and cold engine.
This is theoretical as I have not done this but: If you have the car raised in the front (on jackstands or ramps) the oil level should be below the hole.

Quote:
Originally Posted by Maciek4530 View Post
- If i remove screw (volvo 1328241) plunger (?) and spring will fell out? Can i put them in place without removing oil pump (so basically whole engine)?
Don't want to remve whole engine right now before winter at my driveway.

- There is any chance to put those parts backwards or both can be installed in different orientation?
Remove it slowly and keep track of orientations. Take photos. Have a helper who can assist with the visuals.
__________________
1985 744 gle d24t
1985 745 gle d24t
Reply With Quote
  #4  
Old 11-09-2024, 09:29 AM
Maciek4530 Maciek4530 is offline
Junior Member
 
Join Date: Oct 2024
Location: Poland
Vehicle: D24
Posts: 16
Default

Ok, i replace washer - everything went smooth - i even made short video for anyone who would be intrested how it look like: how much oil will spill if car is full, what parts are there and some OEM numbers, washer size, torque spec. It took me maybe 15mins of work. Hope it will be dry now

Washer size 22x29x1,5 - Volvo 18677

https://youtu.be/dHX7uYkzXWY?si=iRTu3NF8wO-r1HhE

Last edited by Maciek4530; 11-09-2024 at 09:34 AM.
Reply With Quote
  #5  
Old 11-09-2024, 09:33 AM
Maciek4530 Maciek4530 is offline
Junior Member
 
Join Date: Oct 2024
Location: Poland
Vehicle: D24
Posts: 16
Default

1c746940-79bb-45da-9f26-a2df2620479c.jpg
e6b4699b-5484-43c8-b903-a1ec55b88905.jpg
Reply With Quote
  #6  
Old 11-09-2024, 11:36 AM
ngoma ngoma is offline
Supporting Member
 
Join Date: Nov 2009
Posts: 1,393
Default

Looks good!
__________________
1985 744 gle d24t
1985 745 gle d24t
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 11:38 AM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.