D24T.com  

Go Back   D24T.com > Technical Discussion Area > Help! My car died!
Register FAQ Community Calendar Today's Posts Search

Reply
 
Thread Tools Display Modes
  #1  
Old 08-22-2024, 08:03 AM
Brady-712K Brady-712K is offline
Junior Member
 
Join Date: May 2024
Location: Boston mass
Vehicle: Pinzgauer 718K and also a 712K but that's a gasser
Posts: 1
Red face Anyone near Boston Mass area?

I recently picked up a 1988 Pinzgauer 718K with a D24t engine, and I'm new to the D24t engine world...
I'm going to have to set the timing of the motor and the injection pump and from the videos I've watched looks to be fairly involved at least tool wise.
Is there anyone local-ish to the Boston area say 100 miles that has the tools, knowledge and time to help sort this out?
I'd pay for the shop time but at this point I'm just trying to find a local community that can work on this engine.
Thanks
Brady
Reply With Quote
  #2  
Old 08-27-2024, 08:13 PM
v8volvo v8volvo is offline
Supporting Member
 
Join Date: Jun 2009
Location: Montana, USA
Vehicle: '86 745, '83 764
Posts: 1,655
Default

Welcome, sounds like a great rig. What is the background on the truck? RHD or LHD? Automatic trans? 718K means 6x6, correct?

There is actually a strong contingent in the New England area of folks who are well versed in these engines. Member RedArrow is in the NYC area, and member DieselScout is in western NY State I believe.

Above all, though, you should get in touch with Tom Bryant who is located in southern Maine. Tom is probably the foremost authority on the D24T engine in the US, maybe the world. Lucky for you he is not far away and would probably enjoy the new challenge of seeing one of these engines in a different environment (as opposed to an old Volvo I mean). He would probably be happy to either help you learn your way around the motor yourself or might perform the work for you if he has the time and inclination and you want to hire him for it.

Your average shop, even a Euro specialist, will have never seen this engine before and have no idea what to do with it. At best they'll tell you they don't want to touch it ... at worst they'll dive in without correct tools/know-how and do serious damage. Many stories of it on here. The community is small but deep and folks will want to help.

Post any questions here and we'll do our best to answer. If you don't find Tom send me a PM and I will forward his email and phone #. He is not usually active on this board but participates in the old D24 email list, and I believe his contact info is somewhere on his blog page. As you can see his interests run beyond D24 engines as well.

https://thosbryant.wordpress.com/
__________________
86 745 D24T/ZF 345k lifted 2.5"
83 764 D24T/M46 155k
Reply With Quote
Reply

Tags
d24t, injection pump, pinzgauer, timing


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 10:33 AM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.