View Single Post
  #4  
Old 08-14-2019, 06:05 AM
Luckylou Luckylou is offline
Junior Member
 
Join Date: Jul 2019
Location: South Jersey
Vehicle: 1986 volvo 245
Posts: 2
Default

Thanks for the feedback guys!
Anders, thanks for all the help you have provided before i could post!!
Once i source all the parts, i will post a build thread and share all pics and mishaps along the way.
This is the adapter plate i will be ordering
https://www.deeworks.ca/product/volv...ssion-adapter/
This adapter has dual bolt patterns, lets you choose the position you want to mount!
There is 3 differnt style transmissions, with different output shaft bearing sizes. I have the older style 6spd, so i would have to use the adapter plate with external slave cylinder, instead of the concentric release bearing- which i feel would be an easier swap since you would just use the automatic bellhousing and taper to run hydraulic line into.
Anderson, i really appreciate your help man! i thought i could just get away with notching the crossmember and just dropping it in. I will definitely try to source the correct parts, and do it the tested and proven way. I was a very weary about notching and filling.
Reply With Quote