thanks for the information V8VOLVO yes i know where the fuel enrichment is .
i will see what i now think about adjusting that screw .
well latest news , i now have a very slight leak on the cold start at the bottom of where its bolted into the injection pump ,i take it that nut and cold start was removed the garage did say on a car that age and mileage that other leaks may occur i have spoken to garage they can do the job in a week , the leak is wetting the spring a bit and a bit wet on the pump moving on there is another small plate below that spring . SO SHOUD I TAKE IT BACKas i don't like to see any leaks a. but its only small .and hopefully they will fix the leak permanently as the cold start seals is a moving part on the pump it will wear out one day . he did say there are 2 seals on the cold start fitting 1 outer and 1 inner into the pump take it thats correct ,
regards jim
|