View Single Post
  #18  
Old 06-30-2020, 03:16 PM
RedArrow RedArrow is offline
Senior Member
 
Join Date: Jan 2013
Location: New York
Vehicle: 1986 Volvo 745 TD
Posts: 900
Default

You can measure it yourself, through the IP sprocket you will see the other hole that the pin will plug on the pump.

I can measure for you in a few mins too.

but, you can use a nice deep socket that is perfectly tight in there. give me a few mins...

Update.
The tool on top is the Volvo one
The one below is made by Matra

The length without the head is 35mm

The thickness is 15.4mm on the Matra VW tool and only 15.1 on the V tool but that has been actively used for decades by an old d24 builder. There's more than 0.3mm wear in his 90 year old elbows.
Attached Images
File Type: jpg 20200630_192506.jpg (437.5 KB, 14 views)
File Type: jpg 15935602811198618022285751616768.jpg (401.4 KB, 12 views)

Last edited by RedArrow; 06-30-2020 at 10:54 PM. Reason: Pics added
Reply With Quote