Quote:
Originally Posted by Jason
I know what you mean by camdisc. Most just call it the cam plate. Interesting that you use the plate as well. I had thought you would just swap the head, but it guess it would make sesnse to use the same plate.
Over here there are some companies making a "high lift" cam plate for the ve pump. I'm not sure of the stock lift but the high lift one is 4mm. There a are a few guys on the Cummins forums over here running a 14mm head with the 4mm cam plate and pushing A LOT of fuel through the ve pump. Way to much for our little engines but cool none the less!
Jason
|
14mm pump head would blow up a d24
I know a guy in sweden who runs with 2 stock d24 pumps and that pushes alot of fuel. I only used the cam plate because it had higher lift otherwise its not necessary