update
thanks for your valued input V8VOLVO i removed every thing to get at the sensor from the out side it was otherwise not coming out !
i drilled a series of 3 mm holes around the outer edge of hole and used a old 6 mm wood chisel to chop it through it came out like bits but the outer shell
had to be chopped out separately .then bore hole all cleaned out with rat tail files . then cleaned away all rust from behind brake dust guards and i implied a coat of copper slip once rust had gone . i did not have any of the correct grease for wheel bearing so sorry i did not open it i think i should have dad a look inside
bearing housing . what is the specification for the grease and do i have to pack it in ?
without you boys half the D24s woud be not on the road now keep up the great work you do !
regards jim
|