View Single Post
  #18  
Old 03-11-2012, 11:57 PM
J_Lanttola J_Lanttola is offline
Junior Member
 
Join Date: Jan 2012
Location: Finland
Posts: 5
Default

Quote:
Originally Posted by michaelovitch View Post
About the VE

http://www.scribd.com/michaelovitch/...Bosch-Ve-Pumps

a VE give max 25 kw per cylinder or 34 hp about 200 for a d24.....

the pump on a tic with a manual gearbox is a EP-VE 6-10 f2400 L tic 2

i don't know this engine specific bsfc (i 'm searching) but you will not be able to do 200 hp with stock components (like injectors)

Is that with a 10mm rotor? I got 267hp with a built pump with 12mm rotor and stock injectors The pump was built by a diesel tuning shop but i don't know what they have done to it, and i think they aren't very eager to reveal their secrets..

I just went and bought my turbo based on guessing, so i didn't make much calculating Seems to work fine to me, except it could spool a bit quicker. with a smaller hot side it may spool quicker but on the other hand the drive pressure would increase.

And the car is a daily driver
Reply With Quote