once removed, look for in our spare one of equal size but green, put it on the rod, and screw the washer.
For all the washers there are spares, go the reverse order replacing the old for new.
the rod is recommended to lubricate the area and that the bolt does not remain stuck, then you will have to move.
Here some schemes pump operation
![](http://i84.servimg.com/u/f84/12/44/39/82/pump310.jpg)
to place the pump when need to press a ramp with a pin inside the pump that is a bolt outside, then we must put pressure so that this gate can be placed well. , after that there will either put the idle with the screw coming out of the pump handle is attached to the accelerator.
Be careful
Here in Spanish
http://www.volvo4life.es/foro/index.php?topic=19606.0