240 turbo diesel oil pan!
So I have been tinkering with the idea of how to easily/ cheaply build a turbo diesel 240 or two... I used a turbowerx scavenge pump and wolsten tech TDR connected to a oil pressure switch to pull the turbo drain and pump it into the oil pan on my current 240. That's an expensive route to go, I don't want to do it again.
So.. I can graft a d24t oil drain onto a d24 pan... End result one scrap pan, and so-so 240 turbo pan.. So I bought some aluminum and crafted a drain block and welded it to the 240 pan. I can use the stock d24t turbo and drain.
I will be building a few of these, so if someone is interested in buying one, send me a pm!
Here is a picture of the first "prototype". I need to do a few changes but it's a fully functioning turbo pan!
|