Quote:
Originally Posted by matchless
So you know the parts number of the cam plate? I have found one but I'm not sure if it is the right one
|
Bosch 1466111626 Cam Plate
the locating pin for the plunger on this is bigger than the original by 0.5mm if i recall so you have to press it out a grind it down a little. I will post measurements when i get home.
Dan
Edit
The pin in 9.13mm long
The standard pump pin width is 3.5mm
The upgraded pump is 4.00mm wide
The pin protrudes 4mm from the cam plate with the rest being interference fit into the camplate.