Cold start
hi all
i have managed to move the 2 ball stop adjusters on the throttle and kick down only a bit and now the revs don't shoot up by the 200 rpm which they should do when engine is cold .the cable does move when engine hot and cold as you can see postion of crimp on cable . i have not touched anything else so i don't know really what i have done now, i did it because i was trying to make kick down cable a little more tight as it felt a bit slack but not much so then i moved the cold start stud too and wound the plastic nut on the throttle cable that goes round to pedal , the cold start only comes on by about 100 rpm .
im sorry i did this and won't touch it again if i can get cold start fixed
regards jim
|