Quote:
Originally Posted by jetfiremuck
It's probably over geared...
|
Agreed. Mine turns ~2300 RPM @ 60 MPH, does pretty well. Power really starts at 2500 RPM, shoot for that at or slightly above your cruising speed.
Quote:
Originally Posted by jetfiremuck
I'll probably do an in truck rering bearings etc as I'm at it.Ive wired the glow plugs to the start circuit as well as its slow to start, even with a new geared starter and battery. I've got a lot of blowby, at idle thru the pcv puck, with oil in the hose to turbo inlet.
|
Don't touch the bearings unless you have valid reason. Lower end on these are usually trouble-free.
Hard start w/ good starter and battery which is helped by GPs indicate poor compression. May simply be rings but check the cylinder walls closely.