D24T.com  

Go Back   D24T.com > Forum Info > New Member Introductions

Reply
 
Thread Tools Display Modes
  #1  
Old 05-03-2019, 07:32 PM
Omish007 Omish007 is offline
Junior Member
 
Join Date: May 2019
Location: South Dakota
Vehicle: 1984 Volvo 760
Posts: 5
Default New guy...

Hello. I am new to the D24T world and am seeking information for a build up. The 1984, 760 GLE, that I am acquiring currently does not run. No compression, I guess. I'd like to get it built into something with a bit more power than stock form. Anything helpful is greatly appreciated! Thank you.
Reply With Quote
  #2  
Old 05-04-2019, 10:30 AM
v8volvo v8volvo is offline
Supporting Member
 
Join Date: Jun 2009
Location: Montana, USA
Vehicle: '86 745, '83 764
Posts: 1,618
Default

Welcome to the forum. Sounds like a good project!

We'll look forward to hearing more about what you are working with, glad to help with any information we can give.

The reason it doesn't run could be due to loss of compression but it could also be any number of other reasons, many of which would be simpler to repair. Before assuming you need to commit to an engine rebuild you may want to spend some time assessing the condition of the fuel system, glow plugs and engine timing and test the compression to determine exactly what the problem is. If you're lucky it might need less work than you thought.

If you do any kind of work on the engine, at some point you will run into the need for special tools to set camshaft and injection pump timing and achieve high installation torque on the crankshaft center bolt. Members on here have successfully fabricated homemade copies of the factory tools and can share info on how to do it. Or, other members who own the factory special tools are willing to loan or rent them. Bottom line is don't let this become an obstacle for you because there are ways to get whatever you need without too much effort and little or no cost.

I might be the closest other forum member to you (central MT). If you come through the area you are welcome to get in touch. I would be happy to share tools, parts, or whatever else may help.

Good luck and we encourage you to start a thread about your car in the Member Showroom section to share your progress!
__________________
86 745 D24T/ZF 345k lifted 2.5"
83 764 D24T/M46 155k
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 06:08 AM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.