D24T.com  

Go Back   D24T.com > Technical Discussion Area > Diesel Engine and Drivetrain

Reply
 
Thread Tools Display Modes
  #31  
Old 03-21-2021, 04:37 AM
ukvolvo ukvolvo is offline
Member
 
Join Date: Feb 2021
Location: Uk-North
Vehicle: 940 d24tic
Posts: 56
Default

I have just spent a bit time copying the relevant pages for d24's in the injection and timing belt manuals i have been given a lend of.

I believe in helping everyone out and keeping old knowledge circulating SO...

Will happily share them but have a issue.... i dont like been sued so i need to remove the company name from the bottom and can not edit pdfs myself.

Could someone, a mod perhaps edit the files for me if i email them over? They are all individual pages too so if combined would be better. There is only 10 pages there so its no mamooth task. Free version on adobe etc wont allow editing. I was lucky to be able to select the area for scan and get one page at a time.

There's a pre 93 timing belt guide, post 93 timing belt guide

And injection timing for d24t up to 82 as the book was old (not sure if procedure is the same across all years, hoping so)

All with diagrams and tools needed



Mick

Last edited by ukvolvo; 03-21-2021 at 04:39 AM.
Reply With Quote
  #32  
Old 03-23-2021, 07:15 AM
v8volvo v8volvo is offline
Supporting Member
 
Join Date: Jun 2009
Location: Montana, USA
Vehicle: '86 745, '83 764
Posts: 1,614
Default

That is a generous offer, thank you!

Sent you a PM with my email address, feel free to send them to me and I will see what I can do, or if I can't get them fixed up, then I'll take the lawsuit risk and post them as they are. I don't think anyone is likely going to come after us for sharing info about ancient old Volvos here in 2021.
__________________
86 745 D24T/ZF 345k lifted 2.5"
83 764 D24T/M46 155k
Reply With Quote
  #33  
Old 04-03-2021, 05:57 PM
ngoma ngoma is offline
Supporting Member
 
Join Date: Nov 2009
Posts: 1,351
Default Parts Diagrams

Also, Parts Diagrams (Parts Lists). Sometimes more helpful than service manuals.

https://www.gcp.se/en/catalogues/
__________________
1985 744 gle d24t
1985 745 gle d24t
Reply With Quote
  #34  
Old 04-04-2021, 11:20 AM
coconup coconup is offline
Junior Member
 
Join Date: Dec 2020
Location: Germany
Vehicle: VW LT
Posts: 28
Default

@ukvolvo I would also really appreciate it if you could send them over. I'm about o approach the same daunting job and any bit of information helps.

Re special tools, I found this one which looks suspiciously similar to volvo nr 5188: https://www.ebay.de/itm/372568724385

Anyone here used it for the job?
Reply With Quote
  #35  
Old 04-05-2021, 12:33 PM
ukvolvo ukvolvo is offline
Member
 
Join Date: Feb 2021
Location: Uk-North
Vehicle: 940 d24tic
Posts: 56
Default

Quote:
Originally Posted by coconup View Post
@ukvolvo I would also really appreciate it if you could send them over. I'm about o approach the same daunting job and any bit of information helps.

Re special tools, I found this one which looks suspiciously similar to volvo nr 5188: https://www.ebay.de/itm/372568724385

Anyone here used it for the job?
I have emailed over the details to v8volvo so i suspect a link will arrive on here soon If not i can always email my originals over. That tool does look interesting. All i have acquired so far is a adapter for pump timing physical tool wise. The kit from ebay will do the camshaft plate and crank locking tool so just some pins and the torque tools for camshaft pulley and crankshaft to go.

Mick
Reply With Quote
  #36  
Old 02-01-2022, 01:41 AM
Torbik Torbik is offline
Junior Member
 
Join Date: Aug 2018
Location: EU
Vehicle: 2 x 940, D24TIC and D24
Posts: 5
Default

Can someone please post a picture of Volvo tool 5190 ( The camshaft allignement bracket) with its thickness.
Scribe around it with a pencile to a white paper and mark the measurement of atleast one side please,
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 12:12 AM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.