#1
|
|||
|
|||
Recieved Four D24T engine blocks
I picked 'em up for NOTHING.
One block has a crank. One block has squirters. The other two are completely bare. I've got four dead D24's so theres good cranks, rods, bearings and everything else to build some fresh D24T's except I need some D24T Pistons, 3 sets of squirters and a couple of Turbo Exhaust manifolds. I can barely get a hold of pistons from IMC maybe not anymore... but last I checked there was a set of 2nd OS. @ 97$ per piston. Mahle. Does anyone have a way of getting / sourcing some of theses parts? (D24T pistons + rings, and Squirters?)
__________________
Redblocks are fun and easy but Greenblocks take skill. '79 245 with D24TIC + M47 |
#2
|
||||
|
||||
Last time I checked IMC had pistons and rings. I have never seen oil squirters listed anywhere. You might try over on the VWdiesel.net site and see if anyone has any laying around. I would expect they are the same as a 1.6 turbo diesel.
Your shop buy through IMC I take it? We get stuff from them too. Jason
__________________
Back again with a '84 760 GLE D24T/ZF SOLD but not forgotten! 1984 760 Sedan, built D24Tic/ T-5 swapped My engine build: http://www.d24t.com/showthread.php?t...t=engine+build T-5 swap: http://d24t.com/showthread.php?399-W...to-quot-w-pics! |
#3
|
|||
|
|||
yeah, IMC is 15 miles away.. but they deliver. WorldPac is just 4 blocks up from my shop. but they don't carry much D24 stuffs.
__________________
Redblocks are fun and easy but Greenblocks take skill. '79 245 with D24TIC + M47 |
#4
|
|||
|
|||
Pistons, rods, squirters, valves, rings, etc are all identical to what is in a VW 1.6TD engine, as used up through 1992. Should be easy enough to find.
__________________
86 745 D24T/ZF 345k lifted 2.5" 83 764 D24T/M46 155k |
#5
|
|||
|
|||
I ordered some 1.6D (don't remember if it was turbo or non) rod bearings and they ended up being smaller than the D24's.
Maybe something else happened. but I thought it would have worked.
__________________
Redblocks are fun and easy but Greenblocks take skill. '79 245 with D24TIC + M47 |
#6
|
|||
|
|||
Quote:
Oil squirters from Volkswagen 1.8 16v (KR/PL)-block should fit to d24t block, and they sell still new ones, oil squirters i mean. |
#7
|
||||
|
||||
Something must have gotten boxed wrong, as they should be the same.
Jason
__________________
Back again with a '84 760 GLE D24T/ZF SOLD but not forgotten! 1984 760 Sedan, built D24Tic/ T-5 swapped My engine build: http://www.d24t.com/showthread.php?t...t=engine+build T-5 swap: http://d24t.com/showthread.php?399-W...to-quot-w-pics! |
#8
|
|||
|
|||
Quote:
Thanks for the tip about the squirters -- would be hard to get em otherwise!
__________________
86 745 D24T/ZF 345k lifted 2.5" 83 764 D24T/M46 155k |
#9
|
|||
|
|||
FCP Groton has Kolbenschmidt pistons for these engines. Bought a set of 'em last year.
|
#10
|
|||
|
|||
Quote:
Steve |
|
|