D24T.com  

Go Back   D24T.com > Classifieds > Parts for sale

Reply
 
Thread Tools Display Modes
  #1  
Old 06-04-2017, 11:18 AM
divnis divnis is offline
Junior Member
 
Join Date: Oct 2015
Posts: 1
Default M90 gearbox

M90 gearbox for d24 with slave cylinder and drive shaft. Very good condition, no leaks, no play in shifter bushings. Price 350EUR + shipping. Located in Latvia.
+371 28676966 divnis@inbox.lv



Reply With Quote
  #2  
Old 08-28-2017, 09:44 PM
Slobodan Slobodan is offline
Senior Member
 
Join Date: Jun 2009
Location: Portland, OR
Posts: 214
Send a message via AIM to Slobodan
Default

Interested, but money is the problem.
__________________
Redblocks are fun and easy but Greenblocks take skill.
'79 245 with D24TIC + M47
Reply With Quote
  #3  
Old 05-13-2019, 11:39 AM
barkster1971 barkster1971 is offline
Member
 
Join Date: May 2019
Location: Swineshead
Vehicle: 760gle turbo diesel
Posts: 33
Default hi

Still have this? Interested in this.
Reply With Quote
  #4  
Old 05-14-2019, 06:51 AM
v8volvo v8volvo is offline
Supporting Member
 
Join Date: Jun 2009
Location: Montana, USA
Vehicle: '86 745, '83 764
Posts: 1,618
Default

This is probably long gone since it was originally advertised 2 years ago (you might try contacting the OP directly at his email address in the post to be sure).

Regardless I will note the following info for posterity in case others see this later on or are considering an M90 swap in an older car.

Installing this transmission and its crossmember and mount in an earlier car will also require replacing the front (engine) crossmember, the engine mount brackets on the crossmember and on the engine, and the engine mounts themselves, using the late style fluid filled mounts and late (or gasser) xmember without the welded lower mount bracket on the driver's side. The vertical transmission mount seen on the M90 here won't work correctly with the earlier style angled solid engine mounts used on 700 series diesels through the late 1980s and on all 200 chassis cars. The mismatch will lead to misaligned driveline, rapid failure of all three mounts, oil pan contact with the crossmember, etc.

The early style angled engine mounts require a corresponding angled mount on the transmission to allow the shear-style tripod mounting arrangement to work as designed. The later engine mounts that would have been in the car this transmission came from are mounted with a vertical attitude, rather than at an angle, and are designed to be used with this vertical transmission mount.

Another option to create a usable combination would be to adapt the early style angled transmission mount and transmission crossmember to the M90 trans, but that would require custom fabrication and your results might vary.

The ideal way to sell or buy a bolt-in M90 conversion kit would be to have it also include the upper and lower engine mount brackets on both sides, a set of new or good used late style diesel engine mounts, and possibly also the engine crossmember although that can be sourced from an 8v gas engine model instead. Of course including the driveline as this advertisement does is beneficial also.

Good luck!
__________________
86 745 D24T/ZF 345k lifted 2.5"
83 764 D24T/M46 155k
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 01:19 AM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.