|
#1
|
|||
|
|||
Headgasket gone - MLS replacement?
Anyone know where I can get an MLS headgasket for my bus?
Was leaking oil, so replaced the head bolts, and now it's filling the coolant tank with oil - was a long shot! So - I need a new headgasket to replace mine - it's a fibre 2 notch one on at the moment, and I need any special tools required - any clues where and what I will need for this? Cheers, Ian |
#2
|
||||
|
||||
From Tasca or directly from a volvo dealer if there is one in your area. Part numbers for the gaskets are listed in the engine section.
Jason
__________________
Back again with a '84 760 GLE D24T/ZF SOLD but not forgotten! 1984 760 Sedan, built D24Tic/ T-5 swapped My engine build: http://www.d24t.com/showthread.php?t...t=engine+build T-5 swap: http://d24t.com/showthread.php?399-W...to-quot-w-pics! |
#3
|
|||
|
|||
Ok, thanks, I found the 3 standard Volvo part numbers for the headgaskets on here, and it said the standard part numbers will be the metal ones now, not the fibre ones. Is this the same as the MLS that people refer to though?
Had a look on Tasca but couldn't find it on there! What will I need in the way of special tools? |
#4
|
||||
|
||||
Yes the MLS gasket means multi layer steel, which is the metal one. Your going to need a few tools like cam counter hold, the cam lock tool, a 27mm socket for the crank bolt, and a crank counter hold to be able to tighten the crank bolt again. You can get away without the belt tensioner, just install it again with the same amount of deflection. Make sure you replace the water pump while your in there. There are a few write ups on the forum on head gasket/timing belt jobs, do a search and you'll find more info and reading.
Jason
__________________
Back again with a '84 760 GLE D24T/ZF SOLD but not forgotten! 1984 760 Sedan, built D24Tic/ T-5 swapped My engine build: http://www.d24t.com/showthread.php?t...t=engine+build T-5 swap: http://d24t.com/showthread.php?399-W...to-quot-w-pics! |
#5
|
|||
|
|||
Ok cheers.
I've spoke to a local motor factors who can get a steel 2 notch for £94. Volvo say £60+vat but he doesn't know if that is Fibre or Metal - he says the only way to find out is to create a technical query and send it to Sweden - which he says could take several weeks to come back...!! Have also emailed Tasca. Re: Tools, I have found Draper sets 57629 and 63397 listed as special tools for Volvo 760TD/VW LT35 2.4 TD. Could you have a look and see if that is everything I'm likely to need, or if there is anything missing (except 27mm socket which I already have, and screw-in DTI which I have on lend): 57629 - http://cgi.ebay.co.uk/DRAPER-57629-1...item20b0997110 63397 - http://cgi.ebay.co.uk/DRAPER-63397-Z...item2a09913a38 |
#6
|
|||
|
|||
Well... Tascas seem fairly unhelpful so far... all they have done so far is try and sell me a B234F headgasket, which is the 2.3 16v PETROL lol.
Quote:
|
|
|