D24T.com  

Go Back   D24T.com > Technical Discussion Area > Performance and aftermarket

Reply
 
Thread Tools Display Modes
  #1  
Old 03-13-2018, 10:54 AM
ian2000t ian2000t is offline
Senior Member
 
Join Date: Feb 2011
Location: West Mids, UK
Posts: 226
Default Effects of timing (12mm pump)

I've installed my 12mm pump now, and have timing set to 0.88 at the moment. My old pump was set to 1.05mm (thought I'd set it to 1.00, but obviously not!

I'm going to advance it a bit more, but what should I expect? Should turbo lag reduce or increase with extra advance? How do I know if I've gone too far? It didn't really rattle when warm set at 1.05 with the old pump, but the pump was very worn!

Does 12mm pump affect the "perfect timing" value?

I'm running 163 bar Monarch GTD nozzles and I believe my engine is probably a bit low on compression generally, but all cylinders within 10-15% of each other. Starts really quickly on all 6 even at 0C with only giving glow plugs 15 seconds, so can't be too worn.
__________________
1990 Volvo 765 D24Tic (factory UK spec Tic). Monark 273 nozzles 163bar, Ajusa MLS gasket, 16psi, Water Injection, 17" Titans with 25mm H&R spacers, running 85% WVO/SVO.
http://i103.photobucket.com/albums/m...AG0269-sig.jpg
Reply With Quote
  #2  
Old 03-23-2018, 11:21 AM
anders anders is offline
Supporting Member
 
Join Date: Jul 2010
Location: NW Washington USA
Posts: 831
Default

The 12mm pump will effectively have more advanced timing then the 10mm pump. I typically run .10mm less timing with the 12mm pump. So around .9-.95 seems to be good.
Advancing the pump runs cleaner, retarded will spool the turbo faster.
__________________
12mm pump heads, ARP stud kits and GTD nozzles available! http://d24t.com/showthread.php?t=1646
NA intake manifolds and 240 turbo pans for sale.
Need d24 or d24t parts? PM me!
Shipments done on fridays!

1982 242 D24+T/M46- Super pumped! Build thread:
http://www.d24t.com/showthread.php?t=1545
1984 764 D24T/ZF build thread: http://www.d24t.com/showthread.php?t=1734
Diesel parts cars: 82 244,83 244, 84 244, 84 245, 85 745
Reply With Quote
  #3  
Old 04-04-2018, 04:01 AM
ian2000t ian2000t is offline
Senior Member
 
Join Date: Feb 2011
Location: West Mids, UK
Posts: 226
Default

Ok thanks. I have tried 0.88, 0.93 and now 1.05 (it moved when I tightened it up). 0.93 felt the best in terms of spool and power.

1.05 is too far I think - bit clattery around 2000rpm, and feels a bit weak under boost.
__________________
1990 Volvo 765 D24Tic (factory UK spec Tic). Monark 273 nozzles 163bar, Ajusa MLS gasket, 16psi, Water Injection, 17" Titans with 25mm H&R spacers, running 85% WVO/SVO.
http://i103.photobucket.com/albums/m...AG0269-sig.jpg
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 11:49 AM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.