D24T.com  

Go Back   D24T.com > Technical Discussion Area > Diesel Engine and Drivetrain

Reply
 
Thread Tools Display Modes
  #1  
Old 09-12-2009, 09:51 AM
jbg jbg is offline
Administrator
 
Join Date: Jun 2009
Location: MD, USA
Vehicle: 1985 Volvo 740 GLE turbo diesel
Posts: 194
Question Importance of the rear cam sprocket key?

Hello,

I'm in the midst of replacing a leaking rear camshaft oil seal and when I removed the rear sprocket I realized the key was missing from its bore. I've looked back there, used a magnet, etc, but I cannot locate it. This lead my to ponder whether the key was there to begin with?

I've read that the key is there to align the sprocket in the correct position on the camshaft, its not there to aide in torquing the bolt that holds it. So, what does the collective think?

I'm sure I could use a piece of steel stock for a replacement to help align, but otherwise is it really needed?

Thank you.

-Jim
__________________
Jim

1985 Volvo 740 GLE turbo diesel
Reply With Quote
  #2  
Old 09-12-2009, 11:18 AM
MRDART MRDART is offline
Member
 
Join Date: Sep 2009
Location: Homeland of the bricks
Posts: 52
Default

Hi! There is no key for the rear or front sprocket this is to facilitate timing of camshaft and dieselpump.
On the dieselpump shaft there is a key.
Timing of the camshaft is done with the rear sprocket removed and a special tool inserted in the back of the camshaft and the crank in pos with no 1 piston top dead center. Once that is finished you go on with timing of the pump...
These engines are much more complicated to work on than the gassers but when they are in good condition they make the most beautiful sound...

Best regards/ Tommy
__________________
If people where ment to be vegetarians, then why are cows made of meat??
Reply With Quote
  #3  
Old 09-12-2009, 11:23 AM
MRDART MRDART is offline
Member
 
Join Date: Sep 2009
Location: Homeland of the bricks
Posts: 52
Default

This link every d24/ d24t/ d24tic enthusiast should read through, lots of good information here.
Best regards/ Tommy

http://volvoturbodiesel.blogspot.com/
__________________
If people where ment to be vegetarians, then why are cows made of meat??
Reply With Quote
  #4  
Old 09-12-2009, 07:14 PM
v8volvo v8volvo is offline
Supporting Member
 
Join Date: Jun 2009
Location: Montana, USA
Vehicle: '86 745, '83 764
Posts: 1,618
Default

Yep no key.

They are complicated to work on but actually easier than the VW 4cyl version of this diesel engine. On that one you have to get cam, crank, and pump all timed at once, whereas on the D24 you can do it one at a time -- cam first, then pump second. Makes it more straightforward.
__________________
86 745 D24T/ZF 345k lifted 2.5"
83 764 D24T/M46 155k
Reply With Quote
  #5  
Old 09-13-2009, 06:13 AM
Jason's Avatar
Jason Jason is offline
Owner/admin
 
Join Date: Jun 2009
Location: St.Louis, MO
Posts: 1,266
Default

George, I don't know about about easier than the 4cyl... With the D24 you have the extra pulley on the backside of the cam to deal with too. To get things set on the vw, you lock the cam, stick in the pump lock and set the tensioner and your done. I didn't think that was too bad, but we can agree to disagree.

Either way I would rather work on the D24, being the rare bird it is... Its nice to work on something different for a change!

Jason
__________________


Back again with a '84 760 GLE D24T/ZF

SOLD but not forgotten! 1984
760 Sedan, built D24Tic/ T-5 swapped

My engine build: http://www.d24t.com/showthread.php?t...t=engine+build
T-5 swap: http://d24t.com/showthread.php?399-W...to-quot-w-pics!
Reply With Quote
  #6  
Old 09-13-2009, 07:40 AM
jbg jbg is offline
Administrator
 
Join Date: Jun 2009
Location: MD, USA
Vehicle: 1985 Volvo 740 GLE turbo diesel
Posts: 194
Thumbs up

Quote:
Originally Posted by MRDART View Post
Hi! There is no key for the rear or front sprocket this is to facilitate timing of camshaft and dieselpump.
Thanks for the replies Tommy, et al.,

I thought the same as I knew part of the timing procedure was to "slip" the rear sprocket to set the final injection pump time. I little paranoia helps in remembering something like this. I replaced the rear camshaft oil seal and the next step is setting the timing, yay!

Thanks again, Jim
__________________
Jim

1985 Volvo 740 GLE turbo diesel
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 12:28 PM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.