|
#1
|
|||
|
|||
Anybody have the part number or link to the crankshaft holder, or what tools specifically interchange between the VW 1.6 and the D24?
|
#2
|
|||
|
|||
Tools
This blog listed a few of the d24 tools, including Volvo part numbers.
http://www.upshiftblog.net/2012/02/i...ming-belt.html Scroll down to see there is the `Greenbook` ready to download, in 3 parts (if needed). (`Service Manual Repairs and maintenance, D20, D24`) Lots of `tool-talk` here too: http://volvoturbodiesel.blogspot.com/ with pics & part #s. Last edited by RedArrow; 02-18-2015 at 08:11 PM. |
#3
|
|||
|
|||
Thanks for the links. I found the first one very useful in cross referencing part numbers and was able to find some of the tools through tasca.
|
#4
|
|||
|
|||
I can get the tools for the same or possibly cheaper than Tasca...
__________________
Mike Rausch Newark/Bear, DE Selling NEW and USED Volvo parts! www.swedishbrickyard.com Email: mike@swedishbrickyard.com |
#5
|
|||
|
|||
hi Mike
re I can get the tools for the same or possibly cheaper than Tasca..
hi again Mike do you know where to get, or can get tool 5201? that is the final tool I need for my belt change on D24 thanks and regards JM |
#6
|
|||
|
|||
Anyone have a compression tester adaptor? PN 5191
__________________
1985 744 D24T M46 49mm t3 @20psi 280k |
#7
|
|||
|
|||
compression tester adapter
If you walk into Harbor Freight, you will see a diesel compression tester kit with several adapters, including the one you need for the d24, d24t. It was around $26 for the entire kit. It is sold in a red color flat hard-case.
There was one 5191 tool listed on ebay recently, for 9.99 plus some shipping. Idk if it is still listed or not. Dont fully trust the results unless you`ve just adjusted the valves to specifications. Last edited by RedArrow; 10-22-2016 at 10:27 AM. Reason: Added a picture of the tester-kit |
|
|