D24T.com  

Go Back   D24T.com > Technical Discussion Area > Diesel Engine and Drivetrain

Reply
 
Thread Tools Display Modes
  #1  
Old 01-01-2019, 10:47 AM
Mick13 Mick13 is offline
Junior Member
 
Join Date: Dec 2017
Location: South France
Vehicle: P100 Ford / 245
Posts: 17
Default 900 Auto trans take off question

I've to pull out the auto gearbox of my 940 TDIC. I'll take the angine for my 240. bolts between engine and gearbox seems hard to access ? So it could be better to take off the engine with trans. How I take off the gear stick ? Any tricks ? information ?
Any information about putting 940 TDIC in a 240 is also welcomed
PS : Sorry for my poor English, I read better than I write ;-)
Reply With Quote
  #2  
Old 01-01-2019, 02:53 PM
ngoma ngoma is offline
Supporting Member
 
Join Date: Nov 2009
Posts: 1,351
Default

Engine and transmission together is easier in my experience.

Remove the radiator, top crosspiece, A/C condenser, e-fan, grille, and you have a nice big clear opening in the front.

Leave the downpipe attached. Disconnect it at the triangular union at the front exhaust pipe.

IIRC you can leave the shifter in place. The linkage underneath has a few e-clips that are easily unhooked. Don't lose the small bushings.
__________________
1985 744 gle d24t
1985 745 gle d24t
Reply With Quote
  #3  
Old 03-10-2019, 01:07 AM
Mick13 Mick13 is offline
Junior Member
 
Join Date: Dec 2017
Location: South France
Vehicle: P100 Ford / 245
Posts: 17
Default

That was as simple as you said thanks
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 07:44 AM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.