#1
|
|||
|
|||
D24T runs!
This morning I started the engine for the first time, after a few cranks it ran almost instantly. I made a short movie of the engine running: http://www.youtube.com/watch?v=JXjnBblqYX0
Things to do: Painting the valve cover Putting the inlet manifold and turbo from a D24TIC on it. Putting it in the car ofcourse... |
#2
|
|||
|
|||
Hi Mark, you've done a wonderfull job, engine is brandnew en running fine!
Holland is a small country but we have much D24's enthousiasts. Volvo for live, of course with the D24T(ic) in front!! |
#3
|
|||
|
|||
Congradulations! Please share your process for priming the IP/injector lines/injectors.
__________________
1985 744 gle d24t 1985 745 gle d24t |
#4
|
|||
|
|||
I've put a plastic tank above the engine, so the diesel went to the pump by itself. Then i disconnected the fuellines at the injectors, cranked it till the diesel came out of the fuellines. Then I fastened the lines and started it. It ran almost instantly. For the oilpump: I filled the bore in the block to the oilpump with oil (at the oilfilter), and oilpressure was already there when i was cranking!
|
#5
|
|||
|
|||
Looks great and sounds even better!
How did you get it started with no bellhousing to mount the starter to, though??
__________________
86 745 D24T/ZF 345k lifted 2.5" 83 764 D24T/M46 155k |
#6
|
|||
|
|||
Starter is mounted on the engine and you can bolt the starter from behind..
|
|
|