D24T.com  

Go Back   D24T.com > Classifieds > Parts for sale

Reply
 
Thread Tools Display Modes
  #1  
Old 02-06-2012, 02:58 PM
EvoStevo EvoStevo is offline
Senior Member
 
Join Date: Jun 2009
Location: Los Angeles, CA
Posts: 141
Default Feeler: D24/D24T Stockpile Part-out

I just want to see how much interest there is in the parts I have listed with my 245 sale thread. I'd prefer not to ship if I don't have to (especially for the big items). Some of the small things can be shipped, but international shipping is a maybe at this point. Local pickup/delivery in Southern California would be ideal though. Chime in if you see anything you want, and make an offer. If I can get most of the major parts called for, I will go this route. Thanks for looking!

Here are the parts I have:
-D24T out of an '82 760 (unknown condition)
-set of 4 MSW 15x7 mesh alloy wheels
-ebay same-side inlet/outlet intercooler
-Mercedes T3 turbo (.48 A/R hot side) from 300D
-RX-7 T3 turbo compressor (.60 A/R cold side)
-3 starters (2 known to work)
-2 D24 metal radiators (unknown condition)
-2 water pumps (unknown condition)
-D24 injection pump (unknown condition)
-New D24 glow plug relay
-Set of new Total Seal gapless piston rings
-New fuel pipe (PN: 1257150)
-Seal ring (PN: 1257809-2)
-Rubber seal (PN: 1246522)
-New Bosch fuel filter
-4 New Fram air filters for D24
-3 timing belts, one in box
-injection pump belt
-original head unit
-D24 wiring harness
-newish-looking upper water inlet
-various hoses (like-new condition)
-new ISSPRO water temp gauge
-spare bulbs
-spare Sylvania headlamp
-1.5 quarts Optilube ULSD fuel treatment
__________________
1984 245 D24/M46, not running
1982 D24T Project Motor Acquired!
Reply With Quote
  #2  
Old 02-06-2012, 08:41 PM
NO_SPRK NO_SPRK is offline
Junior Member
 
Join Date: Jan 2010
Location: Santa Rosa, Ca
Posts: 22
Default

not to nit pick but im looking for a d24t long block
Reply With Quote
  #3  
Old 02-07-2012, 02:48 AM
ian2000t ian2000t is offline
Senior Member
 
Join Date: Feb 2011
Location: West Mids, UK
Posts: 226
Default

Would you post the IP to UK? If so, how much, and is it a turbo pump with the boost compensation?
__________________
1990 Volvo 765 D24Tic (factory UK spec Tic). Monark 273 nozzles 163bar, Ajusa MLS gasket, 16psi, Water Injection, 17" Titans with 25mm H&R spacers, running 85% WVO/SVO.
http://i103.photobucket.com/albums/m...AG0269-sig.jpg
Reply With Quote
  #4  
Old 02-07-2012, 06:14 AM
anders anders is offline
Supporting Member
 
Join Date: Jul 2010
Location: NW Washington USA
Posts: 831
Default

I will be sending a PM.
__________________
12mm pump heads, ARP stud kits and GTD nozzles available! http://d24t.com/showthread.php?t=1646
NA intake manifolds and 240 turbo pans for sale.
Need d24 or d24t parts? PM me!
Shipments done on fridays!

1982 242 D24+T/M46- Super pumped! Build thread:
http://www.d24t.com/showthread.php?t=1545
1984 764 D24T/ZF build thread: http://www.d24t.com/showthread.php?t=1734
Diesel parts cars: 82 244,83 244, 84 244, 84 245, 85 745
Reply With Quote
  #5  
Old 02-07-2012, 07:37 AM
EvoStevo EvoStevo is offline
Senior Member
 
Join Date: Jun 2009
Location: Los Angeles, CA
Posts: 141
Default

Quote:
Originally Posted by NO_SPRK View Post
not to nit pick but im looking for a d24t long block
Okay...what would you call what I'm selling?

Quote:
Originally Posted by ian2000t View Post
Would you post the IP to UK? If so, how much, and is it a turbo pump with the boost compensation?
It's the N/A pump, so no boost compensation. I could investigate shipping to the UK if you're interested. I'd want $80 plus shipping for it .

Quote:
Originally Posted by anders View Post
I will be sending a PM.
PM replied
__________________
1984 245 D24/M46, not running
1982 D24T Project Motor Acquired!
Reply With Quote
  #6  
Old 02-07-2012, 08:55 AM
v8volvo v8volvo is offline
Supporting Member
 
Join Date: Jun 2009
Location: Montana, USA
Vehicle: '86 745, '83 764
Posts: 1,618
Default

I will be driving from Seattle to San Diego and back in March, and would be interested in picking up a few items along the way if you still have any. (Small bits -- starters, water pumps, fuel pipe, gaskets, water neck etc.) If those have not been taken by then, I would like to work out a deal. Probably will be in the SoCal region just about one month from now.

Anders, if there is anything you would want picked up in part of this, I might be able to grab that too...
__________________
86 745 D24T/ZF 345k lifted 2.5"
83 764 D24T/M46 155k
Reply With Quote
  #7  
Old 02-07-2012, 08:47 PM
NO_SPRK NO_SPRK is offline
Junior Member
 
Join Date: Jan 2010
Location: Santa Rosa, Ca
Posts: 22
Default

haha. noo. i ment i didnt want to try and pick parts out of your whole setup. but all i need is a long block.
Reply With Quote
  #8  
Old 02-08-2012, 04:26 PM
EvoStevo EvoStevo is offline
Senior Member
 
Join Date: Jun 2009
Location: Los Angeles, CA
Posts: 141
Default

Quote:
Originally Posted by v8volvo View Post
I will be driving from Seattle to San Diego and back in March, and would be interested in picking up a few items along the way if you still have any. (Small bits -- starters, water pumps, fuel pipe, gaskets, water neck etc.) If those have not been taken by then, I would like to work out a deal. Probably will be in the SoCal region just about one month from now.

Anders, if there is anything you would want picked up in part of this, I might be able to grab that too...
I'll try to get you pictures of those so you can decide whether or not you want them. Hopefully by this weekend. Don't have a price in mind yet, so I'll have to think on that.
__________________
1984 245 D24/M46, not running
1982 D24T Project Motor Acquired!
Reply With Quote
  #9  
Old 02-12-2012, 09:06 AM
NO_SPRK NO_SPRK is offline
Junior Member
 
Join Date: Jan 2010
Location: Santa Rosa, Ca
Posts: 22
Default

Quote:
Originally Posted by EvoStevo View Post
I'll try to get you pictures of those so you can decide whether or not you want them. Hopefully by this weekend. Don't have a price in mind yet, so I'll have to think on that.
hey did you get my message? im interested in the turbo long block
Reply With Quote
  #10  
Old 01-08-2013, 02:09 AM
nelson940td nelson940td is offline
Junior Member
 
Join Date: Jan 2013
Posts: 2
Default 2.400 Tic engine block

Quote:
Originally Posted by EvoStevo View Post
I just want to see how much interest there is in the parts I have listed with my 245 sale thread. I'd prefer not to ship if I don't have to (especially for the big items). Some of the small things can be shipped, but international shipping is a maybe at this point. Local pickup/delivery in Southern California would be ideal though. Chime in if you see anything you want, and make an offer. If I can get most of the major parts called for, I will go this route. Thanks for looking!

Here are the parts I have:
-D24T out of an '82 760 (unknown condition)
-set of 4 MSW 15x7 mesh alloy wheels
-ebay same-side inlet/outlet intercooler
-Mercedes T3 turbo (.48 A/R hot side) from 300D
-RX-7 T3 turbo compressor (.60 A/R cold side)
-3 starters (2 known to work)
-2 D24 metal radiators (unknown condition)
-2 water pumps (unknown condition)
-D24 injection pump (unknown condition)
-New D24 glow plug relay
-Set of new Total Seal gapless piston rings
-New fuel pipe (PN: 1257150)
-Seal ring (PN: 1257809-2)
-Rubber seal (PN: 1246522)
-New Bosch fuel filter
-4 New Fram air filters for D24
-3 timing belts, one in box
-injection pump belt
-original head unit
-D24 wiring harness
-newish-looking upper water inlet
-various hoses (like-new condition)
-new ISSPRO water temp gauge
-spare bulbs
-spare Sylvania headlamp
-1.5 quarts Optilube ULSD fuel treatment
Would you post the engine block of the d24 tic to Portugal? If so, how much?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 06:01 AM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.