D24T.com  

Go Back   D24T.com > Technical Discussion Area > Help! My car died!

Reply
 
Thread Tools Display Modes
  #1  
Old 10-15-2016, 10:29 AM
raw raw is offline
Member
 
Join Date: May 2013
Location: Northamptonshire, England
Posts: 71
Default rebuilt pump and now have bad smoke and injector knock

hi all,

seal on the throttle shaft had failed a second time and also the seal on the pin for the LDA had gone leaving the LDA full of fuel, so it was time to rebuild my injection pump. all went smoothly i think - i did a bad job of marking the adjustment screws though so had a right pain getting it started and now have issues. timing has been adjusted four times now, set at 0.90mm @ no1 TDC.

constant grey smoke, worse on throttle - think retarded timing
bad injector knock but only when on the throttle - think advanced timing
lopeing at idle
long cranking to start - think timing issue
wants to stall at any sign of load unless you give it some throttle - even just turning the steering is enough to stall it

i managed to lose the marks on the gov screw and the throttle arm, didn't bother marking the max fuel as i knew it was out from having to turn the fuel down loads to get MOT passed, hence coming home with a nice new MOT certificate and promptly taking he injection pump apart!

one notch spline up on the throttle shaft and it won't idle less than 2000rpm, went one further and it made no difference to the issues. gov screw i guessed rough position from photos taken before rebuild - don't know what effect this has on running but i can't see it effecting dynamic timing which feels like the issue.

really bored of not having a car now as i've been dealing with this job for two weeks now so would appreciate any help possible!

Rich
__________________

Last edited by raw; 10-15-2016 at 10:35 AM.
Reply With Quote
  #2  
Old 10-15-2016, 03:40 PM
anders anders is offline
Supporting Member
 
Join Date: Jul 2010
Location: NW Washington USA
Posts: 831
Default

Sounds like you got the cam plate in the pump 180 off.
There is a locating dowl on the cam plate that drives the rotor, that should line up with the keyway on the shaft.
You can do a quick try and time your pump 180 off and see if it will start.
__________________
12mm pump heads, ARP stud kits and GTD nozzles available! http://d24t.com/showthread.php?t=1646
NA intake manifolds and 240 turbo pans for sale.
Need d24 or d24t parts? PM me!
Shipments done on fridays!

1982 242 D24+T/M46- Super pumped! Build thread:
http://www.d24t.com/showthread.php?t=1545
1984 764 D24T/ZF build thread: http://www.d24t.com/showthread.php?t=1734
Diesel parts cars: 82 244,83 244, 84 244, 84 245, 85 745
Reply With Quote
  #3  
Old 10-15-2016, 03:42 PM
anders anders is offline
Supporting Member
 
Join Date: Jul 2010
Location: NW Washington USA
Posts: 831
Default

Or hopefully you just got the pump timed 180 off?
__________________
12mm pump heads, ARP stud kits and GTD nozzles available! http://d24t.com/showthread.php?t=1646
NA intake manifolds and 240 turbo pans for sale.
Need d24 or d24t parts? PM me!
Shipments done on fridays!

1982 242 D24+T/M46- Super pumped! Build thread:
http://www.d24t.com/showthread.php?t=1545
1984 764 D24T/ZF build thread: http://www.d24t.com/showthread.php?t=1734
Diesel parts cars: 82 244,83 244, 84 244, 84 245, 85 745
Reply With Quote
  #4  
Old 10-16-2016, 09:48 AM
raw raw is offline
Member
 
Join Date: May 2013
Location: Northamptonshire, England
Posts: 71
Default

thanks anders, saviour! lesson to learn here is never to assume with timing marks, especially on a car that's done 285000 miles and is on it's 6th cam belt that i have evidence of! i had assumed that i was on the compression stroke but actually had timed on the exhaust stroke. a few pump leaks later (cold start advance shaft - washer in the rebuild kits didn't fit and i had disposed of the original :| - and we're up and running! just in time to go back to uni! next weekend i have the range rover to fix and a fiat to service, after 5 weekends straight i'm getting bored of fixing cars at the moment and i havent even looked at the dead gearbox on the V70!

Rich
__________________
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 12:40 AM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.