D24T.com  

Go Back   D24T.com > Classifieds > Parts for sale

Reply
 
Thread Tools Display Modes
  #1  
Old 02-06-2016, 05:26 PM
gsrobinette gsrobinette is offline
Junior Member
 
Join Date: Aug 2013
Posts: 6
Default D24T engine and other parts for sale.

Hello everyone,
I am selling a D24T that came out of 1986 Volvo 740 Wagon. The motor was not original to the car but was swapped into a gasser. The original work was performed by a well respected and knowledgeable diesel mechanic in Portland, Oregon, Chris Bogue, whom has performed many of these swaps. The car always ran vey good and the installation was very clean and professional. Unfortunately, I had developed a coolant leak at some point and I didn't top the radiator off in time. When I topped off the radiator, I failed to bleed everything properly and as a result, the engine got hot and I blew the head gasket on a drive out to Cannon beach. I had the car towed home and took the head off to have it checked for warpage and to have the valves looked at. This work was performed by a very reputable diesel shop in Portland. The head received a clean bill of health, a very thorough cleaning and valve seat and gasket surface re-surfacing to Volkswagen specs. I still have the receipt and the work performed description and the head is still wrapped in very thick plastic and has a light coat of oil. The plan was to re-assemble everything and continue to use the car as my daily driver.
During this time, my wife and I had our first child and the lure of being back in Ohio near our families was too strong. So, I removed the rest of the engine components minus the M46 tranny and brought everything back to Ohio. The plan was to eventually buy another gasser project car to transplant the D24T into but that has not worked out. I am the project manager for a rapidly growing craft brewery and I do not have time for another project. Due to work, a second child and too little time/money to devote to another project the engine has sat in my shop since I got back to Ohio.
I loved the car and I love this engine but I have since restored a 1984 turbo diesel Jetta which is my daily driver. I am also very pleased with the 1.6L Jetta version of the Volkswagen so I am not looking to do anything with the D24T. Id be very happy to see this engine go to someone who loves them as much as I do and this forum is the best place to find other like minded folks. I have the block, re-worked head, injector pump/pre-bent pipes, exhaust downpipe and the triple k turbo, probably some other stuff of use too. I'll make a complete list for anyone interested. I'd like to sell it all at once so I don't have to prepare a bunch of bits for shipping and to make my goodbye short. I am asking $600 for all of it. The head work alone was $400 and all of the parts are in good condition. Sorry for the long story and thank you for reading.
Cheers!
Reply With Quote
  #2  
Old 02-06-2016, 07:40 PM
marcusaerilius marcusaerilius is offline
Junior Member
 
Join Date: Aug 2015
Posts: 9
Default

Hi and thanks for all the info. my zip is 93023. how much do you think the shipping would be? I am in So Cal. Thanks, Mark
Reply With Quote
  #3  
Old 02-07-2016, 05:09 AM
gsrobinette gsrobinette is offline
Junior Member
 
Join Date: Aug 2013
Posts: 6
Default

Mark-I'm not certain... Does anyone know the approximate weight of the D24T? I can look and see if I can find specs on this, or perhaps someone will know. I can then check with some truck freight shippers to get a price I will have to custom build a skid but that won't be an issue. I have plenty of shipping material around. I will do this and send post some pics for all to see this week.
Reply With Quote
  #4  
Old 02-07-2016, 06:26 AM
marcusaerilius marcusaerilius is offline
Junior Member
 
Join Date: Aug 2015
Posts: 9
Default

Thanks for getting back to me. i too will check on shipping prices. Are there any special tools required you may not be using in the future? ( to reassemble the engine ). Thank you, Mark
Reply With Quote
  #5  
Old 02-07-2016, 07:09 AM
RedArrow RedArrow is offline
Senior Member
 
Join Date: Jan 2013
Location: NY
Vehicle: 740
Posts: 519
Default

as far as i remember it was was 460lbs. it was measured on a large industrial scale (not perfect), oil and some water was still inside, plus the stand
nice find. uship.com quoted me 150 from Fl to NY, if from warehouse w forklift precrated TO warehouse w forklift AND loading dock, a yr ago.

Last edited by RedArrow; 02-07-2016 at 07:12 AM.
Reply With Quote
  #6  
Old 02-07-2016, 03:10 PM
gsrobinette gsrobinette is offline
Junior Member
 
Join Date: Aug 2013
Posts: 6
Default

Mark-I have Volvo 9995201 and the green book. I don't have any other assembly tools.
Reply With Quote
  #7  
Old 02-09-2016, 07:44 AM
marcusaerilius marcusaerilius is offline
Junior Member
 
Join Date: Aug 2015
Posts: 9
Default

I checked on shipping from Columbus, Ohio to Ventura, CA: $247. You would need to drop at the terminal and I would have to pickup from T. Otherwise, cost doubles. I didn't have your zip so I guessed. Thanks, Mark
Reply With Quote
  #8  
Old 02-10-2016, 02:52 PM
gsrobinette gsrobinette is offline
Junior Member
 
Join Date: Aug 2013
Posts: 6
Default

What shipping company? I'd be willing to do that, should be no problem. That seems like a good price on your end.
Reply With Quote
  #9  
Old 02-10-2016, 02:55 PM
gsrobinette gsrobinette is offline
Junior Member
 
Join Date: Aug 2013
Posts: 6
Default

Mark, my zip is 43201. I don't know that it's going to change the price at all but that's it if you want to check it out.
Reply With Quote
  #10  
Old 02-11-2016, 07:25 AM
marcusaerilius marcusaerilius is offline
Junior Member
 
Join Date: Aug 2015
Posts: 9
Default

Thanks for the zip; will check it out. Mark
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 03:05 AM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.