#1
|
|||
|
|||
What can I get
Hello guys I have a 940 D24tic for me to get all the stuff I can get.
I thougt about intake manifold, intercooler. the turbo is better? what else would you pick up? thanks
__________________
Volvo 760 GLE TD 1984 Volvo S60 D5 2005 Miata Mk2,5 SC M45 2002 |
#2
|
|||
|
|||
Turbo is same. Intercooler is shit.
I would take intake manifold, those are so gold. Makes fitting intercooler to engine WAY_MUCH_ easier, i have personal experience.. It is horrible to think how you get pipes all the way from left side of the motor to right side.. Jason: if you read this, d24N/A manifold will fit under 700-series bonnet, if you just cut piece of that noisekiller-muffle where intake manifold is on its longest when looking motor as usual. So no problems, and its look MONSTROUS compared to old squishy d24t intake manifold. All who seek making IC project, and cant get TDIC intake manifold, go for d24N/A manifold. And inlet to manifold is hilarious 3". |
#3
|
||||
|
||||
I would install one if I could get one I suppose, but I really don't need 3", the oulet on the turbo is only 2" and its all that size now that I bored out the front of the T manifold. I would really be interested to see if it gains any power with it, to bad I don't have a dyno at my disposal to try such things!
Jason
__________________
Back again with a '84 760 GLE D24T/ZF SOLD but not forgotten! 1984 760 Sedan, built D24Tic/ T-5 swapped My engine build: http://www.d24t.com/showthread.php?t...t=engine+build T-5 swap: http://d24t.com/showthread.php?399-W...to-quot-w-pics! |
|
|