D24T.com  

Go Back   D24T.com > Technical Discussion Area > Diesel Engine and Drivetrain

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-15-2014, 03:44 PM
ngoma ngoma is offline
Supporting Member
 
Join Date: Nov 2009
Posts: 1,351
Default D24 Special Tools

Here are some photos and brief descriptions of D24 Special Tools.

For working on IP, IP belt, IP timing, Cogged cam pulley, Injector lines:
Collection 2.jpg

From top to bottom:

Dogleg 17mm offset wrench w/ 1/2" socket for torque wrench. Easier wrenching of rear cam pulley and IP pulley nuts. Volvo tool P/N reads 9995201
Offset 17mm.jpg

Cam pulley holder. Holds cam pulley stationary while tightening/loosening nut. Also rotates pulley on camshaft to adjust IP timing.
Cogged Cam Pulley Holder.jpg

Closeup of P/N 9995199 21 AF-1134
Cogged Cam Pulley Holder close.jpg

Injector line wrench. Should be able to reach all of them with this wrench! Hazet tool P/N 4560
Injector line wrench.jpg
__________________
1985 744 gle d24t
1985 745 gle d24t

Last edited by ngoma; 07-15-2014 at 04:02 PM.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 11:47 AM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.