|
|
|
|
#1
07-08-2015, 02:35 PM
|
|||
|
|||
Sorry for hijacking this thread but since you have a gasket to look at can you tell me where the oil ports are in the cylinder head? I have a D24T fitted to my boat and there is an oil leak from the front of the head behind the timing back plate, there is no sign of oil looking from the top but you can see it running down below the water pump. I have replaced the valve cover gasket so I am pretty sure it isn't the valve cover.
I once had a Ford Sierra which leaked at the front of the gasket at the oilway for a bit, then blew out suddenly, so I am wary of oil leaks. 
|
|
#2
07-09-2015, 02:38 AM
|
|||
|
|||
|
I believe it is the only tear-drop shaped hole (near the middle). This is oil pressure, return.... I would have to look at a block to determine.
Spenser
|
|
#3
07-09-2015, 03:58 AM
|
|||
|
|||
|
The oil feed for the cylinder head is located around the cylinder head bolt on the injection pump side between cylinders 3 and 4. Or right behind the vacuum pump.
There is several drains, but I would highly doubt those would cause an oil leak.
__________________
12mm pump heads, ARP stud kits and GTD nozzles available! http://d24t.com/showthread.php?t=1646 NA intake manifolds and 240 turbo pans for sale. Need d24 or d24t parts? PM me! Shipments done on fridays! 1982 242 D24+T/M46- Super pumped! Build thread: http://www.d24t.com/showthread.php?t=1545 1984 764 D24T/ZF build thread: http://www.d24t.com/showthread.php?t=1734 Diesel parts cars: 82 244,83 244, 84 244, 84 245, 85 745
|
 |
|
|
Hybrid Mode
