IP Help

[718Pinz]

Hello everyone. I have an issue and I need a little help. I have a truck with a D24T in it that I have been having hell trying to get running correctly. It was pretty slow and under powered, so I decided to do something about it. I did head Studs, “super pump”, injectors (higher pop psi), IC, and turbo.

As I said, I have been having a hell of a time getting it to run properly. I figured that, since the only parts I put on it that were not new were the injectors and the IP, I would take them out and have them gone through and rebuilt. The injectors came back just fine, but not so much luck with the IP.

The IP was mostly ok. They found that it was fueling at about 29% more than needed, and the timing was off. They reset everything back to the top of spec. When I asked what I should be able to expect from those settings, they said 89 HP!!! Does this sound right?

I have attached a photo of the numbers on the pump, in case that is needed.

Thanks,
Phil